Home / Winds / Winds S902M Burma

How To Flash Stock Rom Firmware On Winds S902M Burma

These are the instructions to download Flash or install Stock Firmware (ROM) on Winds S902M Burma (Original firmware) , If you searching for the Winds S902M Burma Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Winds S902M Burma , Here you can download the Official Winds S902M Burma Stock Firmware ROM (flash file) on your Computer

Download Winds S902M Burma Stock Rom (Original firmware)

Requirements: Your Winds S902M Burma Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Winds_S902M_Burma_MT6572_20140903_4.2.2-[flash-file.net].zip
Flash File Size: 383 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Winds S902M Burma

To install the Stock Firmware on Winds S902M Burma , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Winds S902M Burma .

STEP 1: Download and Install the Winds S902M Burma USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Winds S902M Burma device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.Guide To flash Official Stock ROM On Android Device STEP 5: Form the files listed run the Flash_tool.exe file.

Guide To flash Official Stock ROM On Android DeviceGuide To flash Official Stock ROM On Android Device

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. Guide To flash Official Stock ROM On Android Device STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Winds S902M Burma to your system using the USB cable and , press any button other than power button so that your system will detect your Winds S902M Burma Device. You can use volume buttons. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Winds S902M Burma and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Winds S902M Burma using SP Flash Tool.

Keep in mind:

[*] Winds S902M Burma Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Winds S902M Burma Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Winds S902M Burma:If you would like to know how to root your Winds S902M Burma android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Winds Note Grace IV

These are the instructions to download Flash or install Stock Firmware (ROM) on Winds Note …

Leave a Reply

Your email address will not be published. Required fields are marked *