Home / Intex / Intex Aqua Fish

How to Flash /Install (Software) Intex Aqua Fish firmware (Stock ROM)

How to Flash Intex Aqua Fish Stock Firmware using QcomDloader Tool

Want to Install Stock ROM On Intex Aqua Fish ? If you own a Intex Aqua Fish smartphone and searching for the Stock Firmware then you are at the right place. Here i will guide you to install official stock Rom on Intex Aqua Fish smartphone. This guide is simple and easy to follow. We have listed the Official Stock Rom for Intex Aqua Fish below. Download the required file to either upgrade or downgrade your Intex Aqua Fish. This guide is followed by the QcomDloader Tool method which is simple and easy. You can just flash firmware on Intex Aqua Fish using the QcomDloader Tool method. Follow the steps carefully to flash the firmware on Intex Aqua Fish using the guide.

We ask you to read the steps before doing something wrong. “READ READ READ” Once you are done! Now you can download the QcomDloader Tool , USB Drivers and the stock Rom from the below Pre-Requisite note.

Guide To flash Official Stock ROM On Intex Aqua Fish

Download the ROM which we have listed in this table below. This guide is helpful to those who are looking to Downgrade or upgrade your Intex Aqua Fish smartphone. You can anytime flash the stock Rom on Intex Aqua Fish. This guide is also helpful to unbrick the phone (revert back from death), you can install the Stock Firmware build to revert back to old version also. Also if you feel your Intex Aqua Fish lag or has any issue, then flash the stock firmware from the list below and save from situation. Stock Firmware doesn’t void a warranty on your device.

To install the Stock Firmware on Intex Aqua Fish, Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Intex Aqua Fish smartphone.

The Advantage Of Intex Aqua Fish Stock Firmware:

  • Flash Stock To Unbrick your Intex Aqua Fish
  • Flash Stock ROM to Fix the Bootloop problem1
  • Upgrade and Downgrade Intex Aqua Fish
  • Unroot or Fix Bugs on your phone
  • To fix the lag or stutter on Intex Aqua Fish
  • By flashing Stock ROM, you can solve software problems.
  • Revert back to stock to gain your warranty.


So before jump into the manual upgradation setup, please make sure you have a good amount juice with at least 80% Charge. If not please charge the phone. Backup your phone in case if you need it later. If you brick the device we are not responsible. Do it at your own risk. Remember this guide is to update Stock ROM on Intex Aqua Fish.

Download Intex Aqua Fish Stock Firmware (Original flash file):-

Download Stock Firmware Rom

Flash Intex Aqua Fish Stock Firmware using QcomDloader Tool:-

Step 1: Download and extract QcomDloader Tool on your computer. After extracting, you will be able to see the following files: qcomdloader file Step 2: Now, Install Intex Aqua Fish USB Driver on your Computer (if you have already installed the Qualcomm USB Driver on your computer then SKIP this step). qcomdloader driver Step 3: Once you have successfully installed the Qualcomm USB Driver, then Connect Intex Aqua Fish device to the computer (using USB cable). Connect Android Device with Computer Step 4: Once Intex Aqua Fishdevice is connected to the computer, Open QcomDloader.exe. qcomdloader open Step 5: Once, QcomDloader Tool is launched, you will be able to see the following interface: Step 6: Now, Click on the Load Button and locate the Qualcomm Firmware of your Device. Step 7: Now, Click on the Settings Button and Select Download Mode as Upgrade. Step 8: Under Download Settings, Tick Validate Downloaded ROM.

  • Step 9: Now, Leave the eMMC Programmer, Raw program, Patch0 Box as it is. But, you may need to change it, if the name of respected file is not same as written in the Box.
  • For example: If you Open the Qualcomm Firmware Folder (assuming you have already downloaded the firmware), you will find various files of which 3 main files are read by QcomDloader to Flash the extire package i.e prog_emmc_firehose_8916.mbn, rawprogram_unparse.xml, patch0.xml.
  • If in case the eMMC file name is different, then simply write the exact name in QcomDloader, so that it can recoginize the firmware.
  • Step 10: Now, Under chipset ID write the Chipset number (here eMMC file name if prog_emmc_firehose_8916.mbn of which 8926 is the Chipset ID).

Step 11: Now, Click OK to exit the configuration interface. Step 12: Now, Click on Start Button to begin the Flashing process. Step 13: Once, Flashing is completed you will be able to see Green Passed message.

Congratulations, Now you have successfully flashed the stock firmware on your Intex Aqua Fish using QcomDloader Tool

Flash Intex Aqua Fish Stock Firmware using QcomDloader Tool (video):-

https://www.youtube.com/watch?v=VOELi1Nz7vg Readme Once:

  • [*] Compatible With: It supports Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1 and Windows 10 (x32 and x64 bit).
  • [*] Supports: QcomDloader Tool only supports Qualcomm Smartphone and tablets. If your Intex Aqua Fish device is having other chipset than Qualcomm then it will not work for you.
  • [*] Credits: QcomDLoader Tool is created and distributed by Wingtech Shanghai. So, full credits goes to them for sharing the application for free.
Our Score
Our Reader Score
[Total: 0 Average: 0]

Check Also

Intex I-Buddy 3

How to Flash Intex I-Buddy 3 Stock Firmware using Phoenix USB Pro Want to Install …

Leave a Reply

Your email address will not be published. Required fields are marked *