How To Flash Stock Rom Firmware On 10or G

These are the instructions to download Flash or install Stock Firmware (ROM) on 10or G (Original firmware) , If you searching for the 10or G Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on 10or G , Here you can download the Official 10or G Stock Firmware ROM (flash file) on your Computer

Download 10or G Stock Rom (Original firmware)

Requirements: Your 10or G Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: 10or_G_V1.0_70_18042018_QFIL-[flash-file.net].zip
Flash File Size: 2 GB
Flash Tool Link: Qfil Tool

Download Flash File

How to Flash Stock Firmware ROM on 10or G

To install the Stock Firmware on 10or G , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on 10or G .

Step 1: Donload and install 10or G USB Driver on your Computer (if you have already installed the Qualcomm USB Driver on your Computer then SKIP this step). Step 2: Download and extract Qualcomm Flash Image Loader (QFIL) on your computer. After extracting, you will be able to see the following files: Step 3: Now, Open QFIL.exe.   Step 4: Once QFIL is launched, you will be able to see the following screen on your computer: Step 5: Now, Switch Off your 10or G device. Step 6: Once your 10or G device is Switched Off, Press and Hold Volume UP Key and Connect the Device to the Computer using USB Cable.

Step 7: Now, In QFIL, Click on Browse Button and locate the Firmware (.mbn).   Step 8: Once, you have added the firmware file, QFIL will automatically load the rest of the firmware data.

Step 9: Now, Click on the Download button to begin the Flashing Process. Step 10: Flashing Process may take upto 10-15 minutes to complete.

Step 11: Once Flashing process is completed your 10or G device will be reboot automatically. Thats It, We are done!. Now disconnect your 10or G device from the computer and setup everything on your device to use it.

Congratulations, Now you have successfully flashed the stock firmware on your 10or G using Qualcomm Flash Image Loader (QFIL)

Keep in mind:

[*] 10or G Flash Tool: If you need to download the latest version of QFIL Flash Tool, then head over to QFIL Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing 10or G Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT 10or G:If you would like to know how to root your 10or G android device, drop a comment below. We will share the tutorial for your device as quickly as possible .