Flash Guide How to Flash a ROM to Your Android Phone
These are the instructions to download Flash or install Stock Firmware (ROM) on ACE Buzz 1 Plus (Original firmware) , If you searching for the ACE Buzz 1 Plus Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on ACE Buzz 1 Plus , Here you can download the Official ACE Buzz 1 PlusStock Firmware ROM (flash file) on your Computer .
DownloadACE Buzz 1 Plus Stock Rom (Original firmware)
Requirements: Your ACE Buzz 1 Plus Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: ACE_Buzz_1_Plus_MT6739_20180908_8.1.0-[flash-file.net].zip
Flash File Size: 740 MB
How to Flash Stock Firmware ROM on ACE Buzz 1 Plus
To install the Stock Firmware on ACE Buzz 1 Plus Stock , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on ACE Buzz 1 Plus .
STEP 1: Download and Install the ACE Buzz 1 Plus USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your ACE Buzz 1 Plus device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.
STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. 
STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. 
STEP 9: After completed all the above steps, connect your ACE Buzz 1 Plus to your system using the USB cable and , press any button other than power button so that your system will detect your ACE Buzz 1 Plus Device. You can use volume buttons. 
Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your ACE Buzz 1 Plus and switch it ON.
Congratulations, Now you have successfully flashed the stock firmware on your ACE Buzz 1 Plus using SP Flash Tool.
Keep in mind:
[*] ACE Buzz 1 Plus Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing ACE Buzz 1 Plus Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Caution]: On Mediatek powered devices, We do NOT recommend to Flash the Preloader.bin. As it may brick the device, therefore we recommend you to Untick the Preloader while Flashing the firmware.
[*] Broken link Report here.
[*] ROOT ACE Buzz 1 Plus:If you would like to know how to root your ACE Buzz 1 Plus android device, drop a comment below. We will share the tutorial for your device as quickly as possible .
