These are the instructions to download Flash or install Stock Firmware (ROM) on Avvio Q503 Claro (Original firmware) , If you searching for the Avvio Q503 Claro Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Avvio Q503 Claro , Here you can download the Official Avvio Q503 Claro Stock Firmware ROM (flash file) on your Computer.
DownloadAvvio Q503 Claro Stock Rom (Original firmware)
Requirements: Your Avvio Q503 Claro Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Avvio_Q503_Claro_MT6580_20180404_7.0-[flash-file.net].zip
Flash File Size: 1 GB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
How to Flash Stock Firmware ROM on Avvio Q503 Claro
To install the Stock Firmware on Avvio Q503 Claro , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Avvio Q503 Claro .
STEP 1: Download and Install the Avvio Q503 Claro USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Avvio Q503 Claro device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Avvio Q503 Claro to your system using the USB cable and , press any button other than power button so that your system will detect your Avvio Q503 Claro Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Avvio Q503 Claro and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Avvio Q503 Claro using SP Flash Tool.
Keep in mind:
[*] Avvio Q503 Claro Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing Avvio Q503 Claro Stock Firmware as because during the flashing process your personal data will be removed permanently .
[*] Broken link Report here.
[*] ROOT Avvio Q503 Claro:If you would like to know how to root your Avvio Q503 Claro android device, drop a comment below. We will share the tutorial for your device as quickly as possible .