These are the instructions to download Flash or install Stock Firmware (ROM) on Beex M1D (Original firmware) , If you searching for the Beex M1D Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Beex M1D , Here you can download the Official Beex M1D Stock Firmware ROM (flash file) on your Computer.
Download Beex M1D Stock Rom (Original firmware)
Requirements: Your Beex M1D Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Beex_M1D_MT6572_4.2.2-[flash-file.net].zip
Flash File Size: 263 MB
How to Flash Stock Firmware ROM on Beex M1D
To install the Stock Firmware on Beex M1D , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Beex M1D .
STEP 1: Download and Install the Beex M1D USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Beex M1D device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Beex M1D to your system using the USB cable and , press any button other than power button so that your system will detect your Beex M1D Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Beex M1D and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Beex M1D using SP Flash Tool.
Keep in mind:
[*] Beex M1D Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing Beex M1D Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Caution]: 8888888874445566688 Preloader.bin 8888845214444558662ش.
[*] Broken link Report here.
[*] ROOT Beex M1D:If you would like to know how to root your Beex M1D android device, drop a comment below. We will share the tutorial for your device as quickly as possible .