How To Flash Stock Rom Firmware On BLB G3T

These are the instructions to download Flash or install Stock Firmware (ROM) on BLB G3T (Original firmware) , If you searching for the BLB G3T Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on BLB G3T , Here you can download the Official BLB G3T Stock Firmware ROM (flash file) on your Computer.

Download BLB G3T Stock Rom (Original firmware)

Requirements: Your BLB G3T Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: BLB_G3T_SC6820_2.3.5_SPD-[flash-file.net].zip
Flash File Size: 145 MB

Download Flash File

How to Flash Stock Firmware ROM on BLB G3T

To install the Stock Firmware on BLB G3T , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on BLB G3T .

Step 1: Download and Install BLB G3T USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.

Step 2: After Download Stock Rom (pac) for your BLB G3T Device.

Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your BLB G3T Device to the computer (make sure your Android Device is switch off).

Step 6: Once your BLB G3T is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac). Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.

Step 8: During the flashing process your BLB G3T Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.

Step 9: Now you have successfully flashed your BLB G3T using Spreadtrum Upgrade Tool. Once your BLB G3T Device is successfully restarted, Go to Settings About Phone Check firmware..

Congratulations, Now you have successfully flashed the stock firmware on your BLB G3T using Spreadtrum Upgrade Tool

Keep in mind:

[*] BLB G3T Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool for WINDOWS .

[*] Backup Please: Take a backup of your important data before Flashing BLB G3T Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT BLB G3T:If you would like to know how to root your BLB G3T android device, drop a comment below. We will share the tutorial for your device as quickly as possible .