These are the instructions to download Flash or install Stock Firmware (ROM) on Blu Dash JR 4.0K D143K (Original firmware) , If you searching for the Blu Dash JR 4.0K D143K Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Blu Dash JR 4.0K D143K , Here you can download the Official Blu Dash JR 4.0K D143K Stock Firmware ROM (flash file) on your Computer
Download Blu Dash JR 4.0K D143K Stock Rom (Original firmware)
Requirements: Your Blu Dash JR 4.0K D143K Device should have at least 40-50 percent of battery to perform the Flashing Process.
How to Flash Stock Firmware ROM on Blu Dash JR 4.0K D143K
To install the Stock Firmware on Blu Dash JR 4.0K D143K , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Blu Dash JR 4.0K D143K .
STEP 1: Download and Install the Blu Dash JR 4.0K D143K USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Blu Dash JR 4.0K D143K device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Blu Dash JR 4.0K D143K to your system using the USB cable and , press any button other than power button so that your system will detect your Blu Dash JR 4.0K D143K Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Blu Dash JR 4.0K D143K and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Blu Dash JR 4.0K D143K using SP Flash Tool.
Keep in mind:
[*] Backup Please: Take a backup of your important data before Flashing Blu Dash JR 4.0K D143K Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Blu Dash JR 4.0K D143K:If you would like to know how to root your Blu Dash JR 4.0K D143K android device, drop a comment below. We will share the tutorial for your device as quickly as possible .