These are the instructions to download Flash or install Stock Firmware (ROM) on Blu Star 4.0 S410A (Original firmware) , If you searching for the Blu Star 4.0 S410A Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Blu Star 4.0 S410A , Here you can download the Official Blu Star 4.0 S410A Stock Firmware ROM (flash file) on your Computer
Download Blu Star 4.0 S410A Stock Rom (Original firmware)
Requirements: Your Blu Star 4.0 S410A Device should have at least 40-50 percent of battery to perform the Flashing Process.
How to Flash Stock Firmware ROM on Blu Star 4.0 S410A
To install the Stock Firmware on Blu Star 4.0 S410A , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Blu Star 4.0 S410A .
STEP 1: Download and Install the Blu Star 4.0 S410A USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Blu Star 4.0 S410A device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Blu Star 4.0 S410A to your system using the USB cable and , press any button other than power button so that your system will detect your Blu Star 4.0 S410A Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Blu Star 4.0 S410A and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Blu Star 4.0 S410A using SP Flash Tool.
Keep in mind:
[*] Backup Please: Take a backup of your important data before Flashing Blu Star 4.0 S410A Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Blu Star 4.0 S410A:If you would like to know how to root your Blu Star 4.0 S410A android device, drop a comment below. We will share the tutorial for your device as quickly as possible .