These are the instructions to download Flash or install Stock Firmware (ROM) on Blu Studio G2 S010Q (Original firmware) , If you searching for the Blu Studio G2 S010Q Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Blu Studio G2 S010Q , Here you can download the Official Blu Studio G2 S010Q Stock Firmware ROM (flash file) on your Computer
Download Blu Studio G2 S010Q Stock Rom (Original firmware)
Requirements: Your Blu Studio G2 S010Q Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Blu_Studio_G2_S010Q_6.0_MT6737T-[flash-file.net].zip
Flash File Size: 2 GB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
How to Flash Stock Firmware ROM on Blu Studio G2 S010Q
To install the Stock Firmware on Blu Studio G2 S010Q , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Blu Studio G2 S010Q .
STEP 1: Download and Install the Blu Studio G2 S010Q USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Blu Studio G2 S010Q device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Blu Studio G2 S010Q to your system using the USB cable and , press any button other than power button so that your system will detect your Blu Studio G2 S010Q Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Blu Studio G2 S010Q and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Blu Studio G2 S010Q using SP Flash Tool.
Keep in mind:
[*] Blu Studio G2 S010Q Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing Blu Studio G2 S010Q Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Blu Studio G2 S010Q:If you would like to know how to root your Blu Studio G2 S010Q android device, drop a comment below. We will share the tutorial for your device as quickly as possible .