These are the instructions to download Flash or install Stock Firmware (ROM) on BLU Vivo Go V0390WW (Original firmware) , If you searching for the BLU Vivo Go V0390WW Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on BLU Vivo Go V0390WW , Here you can download the Official BLU Vivo Go V0390WW Stock Firmware ROM (flash file) on your Computer
Download BLU Vivo Go V0390WW Stock Rom (Original firmware)
Requirements: Your BLU Vivo Go V0390WW Device should have at least 40-50 percent of battery to perform the Flashing Process.
How to Flash Stock Firmware ROM on BLU Vivo Go V0390WW
To install the Stock Firmware on BLU Vivo Go V0390WW , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on BLU Vivo Go V0390WW .
STEP 1: Download and Install the BLU Vivo Go V0390WW USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your BLU Vivo Go V0390WW device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your BLU Vivo Go V0390WW to your system using the USB cable and , press any button other than power button so that your system will detect your BLU Vivo Go V0390WW Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your BLU Vivo Go V0390WW and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your BLU Vivo Go V0390WW using SP Flash Tool.
Keep in mind:
[*] Backup Please: Take a backup of your important data before Flashing BLU Vivo Go V0390WW Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT BLU Vivo Go V0390WW:If you would like to know how to root your BLU Vivo Go V0390WW android device, drop a comment below. We will share the tutorial for your device as quickly as possible .