How To Flash Stock Rom Firmware On Bravis Alto

These are the instructions to download Flash or install Stock Firmware (ROM) on Bravis Alto (Original firmware) , If you searching for the Bravis Alto Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Bravis Alto , Here you can download the Official Bravis Alto Stock Firmware ROM (flash file) on your Computer.

DownloadBravis Alto Stock Rom (Original firmware)

Requirements: Your Bravis Alto Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Bravis_Alto_MT6582_4.4.2-[flash-file.net].zip
Flash File Size: 407 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Bravis Alto

To install the Stock Firmware on Bravis Alto , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Bravis Alto .

STEP 1: Download and Install the Bravis Alto USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Bravis Alto device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Bravis Alto to your system using the USB cable and , press any button other than power button so that your system will detect your Bravis Alto Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Bravis Alto and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Bravis Alto using SP Flash Tool.

Keep in mind:

[*] Bravis Alto Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Bravis Alto Stock Firmware as because during the flashing process your personal data will be removed permanently .

[*] Broken link Report here.

[*] ROOT Bravis Alto:If you would like to know how to root your Bravis Alto android device, drop a comment below. We will share the tutorial for your device as quickly as possible .