These are the instructions to download Flash or install Stock Firmware (ROM) on Celkon CT-111 (Original firmware) , If you searching for the Celkon CT-111 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Celkon CT-111 , Here you can download the Official Celkon CT-111 Stock Firmware ROM (flash file) on your Computer
Download Celkon CT-111 Stock Rom (Original firmware)
Requirements: Your Celkon CT-111 Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Celkon_CT111_20160113_V2.7-[flash-file.net].zip
Flash File Size: 426 MB
Flash Tool Link: RockChip Batch Tool
How to Flash Stock Firmware ROM on Celkon CT-111
To install the Stock Firmware on Celkon CT-111 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Celkon CT-111 .
Step 1: Download and install Rockchip Driver Assistant on your computer. Step 2: Download and extract RockChip Batch Tool on your computer. After Extracting you will be able to see the following files: Step 3: Now open RKBatchTool.exe from the extracted files. Step 4: Once RKBatchTool.exe is launched, Click on the Box right to the FW Path. Step 5: Once you have succesfully added the firmware, RockChip Tool will load it. Step 6: Now, Turn Off your Celkon CT-111 Device and tablets. Step 7: Now, Press and Hold Volume UP Key on your Celkon CT-111 Device and connect it to the computer using the USB cable.
Step 8: Do not release the Volume UP Key on your Celkon CT-111 Device until Icon 1 turns Green in Color. Step 9: Once your Celkon CT-111 Device is successfully added to the computer, Click on the Restore Button to begin the Flashing process. Step 10: Now, RockChip Batch Tool will Flash the Firmware on your Celkon CT-111 Device (flashing usually takes 4-6 minutes to complete).
Step 13: Once Flashing is completed successfully then you will be able to see Restore Done Success Message. Step 14: Now, close RockChip Batch Tool by clicking on the Exit Button.
Step 15: Disconnect your Celkon CT-111 Device from the Computer and Restart it.
Congratulations, Now you have successfully flashed the stock firmware on your Celkon CT-111 using RockChip Batch Tool.
Keep in mind:
[*] Celkon CT-111 Flash Tool: If you need to download the latest version of RockChip Batch Tool, then head over to RockChip Batch Tool .
[*] Backup Please: Take a backup of your important data before Flashing Celkon CT-111 Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Celkon CT-111:If you would like to know how to root your Celkon CT-111 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .