Home / Cherry / Cherry Razor 2.0

How To Flash Stock Rom Firmware On Cherry Razor 2.0

These are the instructions to download Flash or install Stock Firmware (ROM) on Cherry Razor 2.0 (Original firmware) , If you searching for the Cherry Razor 2.0 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Cherry Razor 2.0 , Here you can download the Official Cherry Razor 2.0 Stock Firmware ROM (flash file) on your Computer

Download Cherry Razor 2.0 Stock Rom (Original firmware)

Requirements: Your Cherry Razor 2.0 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Cherry_Razor_2.0_V1.7_20140510_QFIL-[flash-file.net].zip
Flash File Size: 399 MB
Flash Tool Link: Qfil Tool

Download Flash File

How to Flash Stock Firmware ROM on Cherry Razor 2.0

To install the Stock Firmware on Cherry Razor 2.0 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Cherry Razor 2.0 .

Step 1: Donload and install Cherry Razor 2.0 USB Driver on your Computer (if you have already installed the Qualcomm USB Driver on your Computer then SKIP this step). How To Flash Stock Rom Firmware On Cherry Razor 2.0 Step 2: Download and extract Qualcomm Flash Image Loader (QFIL) on your computer. After extracting, you will be able to see the following files: How To Flash Stock Rom Firmware On Cherry Razor 2.0 Step 3: Now, Open QFIL.exe.How To Flash Stock Rom Firmware On Cherry Razor 2.0   Step 4: Once QFIL is launched, you will be able to see the following screen on your computer: How To Flash Stock Rom Firmware On Cherry Razor 2.0 Step 5: Now, Switch Off your Cherry Razor 2.0 device. How To Flash Stock Rom Firmware On Cherry Razor 2.0 Step 6: Once your Cherry Razor 2.0 device is Switched Off, Press and Hold Volume UP Key and Connect the Device to the Computer using USB Cable.

Step 7: Now, In QFIL, Click on Browse Button and locate the Firmware (.mbn). How To Flash Stock Rom Firmware On Cherry Razor 2.0How To Flash Stock Rom Firmware On Cherry Razor 2.0   Step 8: Once, you have added the firmware file, QFIL will automatically load the rest of the firmware data.

Step 9: Now, Click on the Download button to begin the Flashing Process. How To Flash Stock Rom Firmware On Cherry Razor 2.0 Step 10: Flashing Process may take upto 10-15 minutes to complete.

Step 11: Once Flashing process is completed your Cherry Razor 2.0 device will be reboot automatically. Thats It, We are done!. Now disconnect your Cherry Razor 2.0 device from the computer and setup everything on your device to use it.

Congratulations, Now you have successfully flashed the stock firmware on your Cherry Razor 2.0 using Qualcomm Flash Image Loader (QFIL)

Keep in mind:

[*] Cherry Razor 2.0 Flash Tool: If you need to download the latest version of QFIL Flash Tool, then head over to QFIL Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing Cherry Razor 2.0 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Cherry Razor 2.0:If you would like to know how to root your Cherry Razor 2.0 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

How To Flash Stock Rom Firmware On Cherry Mobile Flare Lite 2

Cherry Mobile Flare Lite 2

These are the instructions to download Flash or install Stock Firmware (ROM) on Cherry Mobile …

Leave a Reply

%d bloggers like this: