How To Flash Stock Rom Firmware On DAQ Q11

These are the instructions to download Flash or install Stock Firmware (ROM) on DAQ Q11 (Original firmware) , If you searching for the DAQ Q11 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on DAQ Q11 , Here you can download the Official DAQ Q11 Stock Firmware ROM (flash file) on your Computer

Download DAQ Q11 Stock Rom (Original firmware)

Requirements: Your DAQ Q11 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: DAQ_Q11_MT6737T_20171211_6.0-[flash-file.net].zip
Flash File Size: 2 GB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on DAQ Q11

To install the Stock Firmware on DAQ Q11 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on DAQ Q11 .

STEP 1: Download and Install the DAQ Q11 USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your DAQ Q11 device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your DAQ Q11 to your system using the USB cable and , press any button other than power button so that your system will detect your DAQ Q11 Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your DAQ Q11 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your DAQ Q11 using SP Flash Tool.

Keep in mind:

[*] DAQ Q11 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing DAQ Q11 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT DAQ Q11:If you would like to know how to root your DAQ Q11 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .