How To Flash Stock Rom Firmware On DOK D302

These are the instructions to download Flash or install Stock Firmware (ROM) on DOK D302 (Original firmware) , If you searching for the DOK D302 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on DOK D302 , Here you can download the Official DOK D302 Stock Firmware ROM (flash file) on your Computer

Download DOK D302 Stock Rom (Original firmware)

Requirements: Your DOK D302 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: DOK_D302_MT6580_20170615_5.1-[flash-file.net].zip
Flash File Size: 764 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on DOK D302

To install the Stock Firmware on DOK D302 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on DOK D302 .

STEP 1: Download and Install the DOK D302 USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your DOK D302 device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your DOK D302 to your system using the USB cable and , press any button other than power button so that your system will detect your DOK D302 Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your DOK D302 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your DOK D302 using SP Flash Tool.

Keep in mind:

[*] DOK D302 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing DOK D302 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT DOK D302:If you would like to know how to root your DOK D302 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .