How To Flash Stock Rom Firmware On Elitek 3S

These are the instructions to download Flash or install Stock Firmware (ROM) on Elitek 3S (Original firmware) , If you searching for the Elitek 3S Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Elitek 3S , Here you can download the Official Elitek 3S Stock Firmware ROM (flash file) on your Computer.

Download Elitek 3S Stock Rom (Original firmware)

Requirements: Your Elitek 3S Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Elitek_3S_SC6820_2.3.5_SPD-[flash-file.net].zip
Flash File Size: 165 MB

Download Flash File

How to Flash Stock Firmware ROM on Elitek 3S

To install the Stock Firmware on Elitek 3S , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Elitek 3S .

Step 1: Download and Install Elitek 3S USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.

Step 2: After Download Stock Rom (pac) for your Elitek 3S Device.

Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Elitek 3S Device to the computer (make sure your Android Device is switch off).

Step 6: Once your Elitek 3S is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac). Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.

Step 8: During the flashing process your Elitek 3S Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.

Step 9: Now you have successfully flashed your Elitek 3S using Spreadtrum Upgrade Tool. Once your Elitek 3S Device is successfully restarted, Go to Settings About Phone Check firmware..

Congratulations, Now you have successfully flashed the stock firmware on your Elitek 3S using Spreadtrum Upgrade Tool

Keep in mind:

[*] Elitek 3S Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool for WINDOWS .

[*] Backup Please: Take a backup of your important data before Flashing Elitek 3S Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Elitek 3S:If you would like to know how to root your Elitek 3S android device, drop a comment below. We will share the tutorial for your device as quickly as possible .