Flash Guide How to Flash a ROM to Your Android Phone
These are the instructions to download Flash or install Stock Firmware (ROM) on Enet E714G (Original firmware) , If you searching for the Enet E714G Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Enet E714G , Here you can download the Official Enet E714G Stock Firmware ROM (flash file) on your Computer.
Download Enet E714G Stock Rom (Original firmware)
Requirements: Your Enet E714G Device should have at least 40-50 percent of battery to perform the Flashing Process.
Package Name: Enet_E714G_18122016_RC.zip
Package Size: 483 MB
How-to Flash: Follow Tutorial
How to Flash Stock Firmware ROM on Enet E714G
To install the Stock Firmware on Enet E714G , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Enet E714G .
Step 1: Download and install Rockchip Driver Assistant on your computer. 
Step 2: Download and extract RockChip Batch Tool on your computer. After Extracting you will be able to see the following files: 
Step 3: Now open RKBatchTool.exe from the extracted files. 
Step 4: Once RKBatchTool.exe is launched, Click on the Box right to the FW Path. 
Step 5: Once you have succesfully added the firmware, RockChip Tool will load it. 
Step 6: Now, Turn Off your Enet E714G Device and tablets. 
Step 7: Now, Press and Hold Volume UP Key on your Enet E714G Device and connect it to the computer using the USB cable.
Step 8: Do not release the Volume UP Key on your Enet E714G Device until Icon 1 turns Green in Color. 
Step 9: Once your Enet E714G Device is successfully added to the computer, Click on the Restore Button to begin the Flashing process. 
Step 10: Now, RockChip Batch Tool will Flash the Firmware on your Enet E714G Device (flashing usually takes 4-6 minutes to complete).
Step 13: Once Flashing is completed successfully then you will be able to see Restore Done Success Message. 
Step 14: Now, close RockChip Batch Tool by clicking on the Exit Button.
Step 15: Disconnect your Enet E714G Device from the Computer and Restart it.
Congratulations, Now you have successfully flashed the stock firmware on your Enet E714G using RockChip Batch Tool.
Keep in mind:
[*] Enet E714G Flash Tool: If you need to download the latest version of RockChip Flash Tool, then head over to RockChip Flash Tool for WINDOWS .
[*] Backup Please: Take a backup of your important data before Flashing Enet E714G Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Caution]: 8888888874445566688 Preloader.bin 8888845214444558662ش.
[*] Broken link Report here.
[*] ROOT Enet E714G:If you would like to know how to root your Enet E714G android device, drop a comment below. We will share the tutorial for your device as quickly as possible .