Home / Eton / Eton P306

How To Flash Stock Rom Firmware On Eton P306

These are the instructions to download Flash or install Stock Firmware (ROM) on Eton P306 (Original firmware) , If you searching for the Eton P306 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Eton P306 , Here you can download the Official Eton P306 Stock Firmware ROM (flash file) on your Computer.

Download Eton P306 Stock Rom (Original firmware)

Requirements: Your Eton P306 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Eton_P306_MT6735M_20151215_5.1-[flash-file.net].zip
Flash File Size: 666 MB

Download Flash File

How to Flash Stock Firmware ROM on Eton P306

To install the Stock Firmware on Eton P306 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Eton P306 .

STEP 1: Download and Install the Eton P306 USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Eton P306 device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.Guide To flash Official Stock ROM On Android Device STEP 5: Form the files listed run the Flash_tool.exe file.

Guide To flash Official Stock ROM On Android DeviceGuide To flash Official Stock ROM On Android Device

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. Guide To flash Official Stock ROM On Android Device STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Eton P306 to your system using the USB cable and , press any button other than power button so that your system will detect your Eton P306 Device. You can use volume buttons. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Eton P306 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Eton P306 using SP Flash Tool.

Keep in mind:

[*] Eton P306 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Eton P306 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Caution]: 8888888874445566688 Preloader.bin 8888845214444558662ش.

[*] Broken link Report here.

[*] ROOT Eton P306:If you would like to know how to root your Eton P306 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Eton i9T

These are the instructions to download Flash or install Stock Firmware (ROM) on Eton i9T …

Leave a Reply

Your email address will not be published. Required fields are marked *