How To Flash Stock Rom Firmware On Evercoss Genpro X S50D

These are the instructions to download Flash or install Stock Firmware (ROM) on Evercoss Genpro X S50D (Original firmware) , If you searching for the Evercoss Genpro X S50D Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Evercoss Genpro X S50D , Here you can download the Official Evercoss Genpro X S50D Stock Firmware ROM (flash file) on your Computer

Download Evercoss Genpro X S50D Stock Rom (Original firmware)

Requirements: Your Evercoss Genpro X S50D Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Evercoss_Genpro_X_S50D_V09_13032017-[flash-file.net].zip
Flash File Size: 995 MB
Flash Tool Link: SPD Flash Tool

Download Flash File

---

Flash File Name: Evercoss_Genpro_X_S50D_V10_31032017-[flash-file.net].zip
Flash File Size: 995 MB
Flash Tool Link: SPD Flash Tool

Download Flash File

How to Flash Stock Firmware ROM on Evercoss Genpro X S50D

To install the Stock Firmware on Evercoss Genpro X S50D , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Evercoss Genpro X S50D .

Step 1: Download and Install Evercoss Genpro X S50D USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.

Step 2: After Download Stock Rom (pac) for your Evercoss Genpro X S50D Device.

Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Evercoss Genpro X S50D Device to the computer (make sure your Android Device is switch off).

Step 6: Once your Evercoss Genpro X S50D is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac). Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.

Step 8: During the flashing process your Evercoss Genpro X S50D Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.

Step 9: Now you have successfully flashed your Evercoss Genpro X S50D using Spreadtrum Upgrade Tool. Once your Evercoss Genpro X S50D Device is successfully restarted, Go to Settings About Phone Check firmware..

Congratulations, Now you have successfully flashed the stock firmware on your Evercoss Genpro X S50D using Spreadtrum Upgrade Tool

Keep in mind:

[*] Evercoss Genpro X S50D Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing Evercoss Genpro X S50D Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Evercoss Genpro X S50D:If you would like to know how to root your Evercoss Genpro X S50D android device, drop a comment below. We will share the tutorial for your device as quickly as possible .