These are the instructions to download Flash or install Stock Firmware (ROM) on Evercoss R40C (Original firmware) , If you searching for the Evercoss R40C Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Evercoss R40C , Here you can download the Official Evercoss R40C Stock Firmware ROM (flash file) on your Computer
Download Evercoss R40C Stock Rom (Original firmware)
Requirements: Your Evercoss R40C Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Evercoss_R40C_SC9830_5.1-[flash-file.net].zip
Flash File Size: 634 MB
Flash Tool Link: SPD Flash Tool
Password to Extract: flash-file.net
How to Flash Stock Firmware ROM on Evercoss R40C
To install the Stock Firmware on Evercoss R40C , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Evercoss R40C .
Step 1: Download and Install Evercoss R40C USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.
Step 2: After Download Stock Rom (pac) for your Evercoss R40C Device.
Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Evercoss R40C Device to the computer (make sure your Android Device is switch off).
Step 6: Once your Evercoss R40C is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac). Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.
Step 8: During the flashing process your Evercoss R40C Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
Step 9: Now you have successfully flashed your Evercoss R40C using Spreadtrum Upgrade Tool. Once your Evercoss R40C Device is successfully restarted, Go to Settings About Phone Check firmware..
Congratulations, Now you have successfully flashed the stock firmware on your Evercoss R40C using Spreadtrum Upgrade Tool
Keep in mind:
[*] Evercoss R40C Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool .
[*] Backup Please: Take a backup of your important data before Flashing Evercoss R40C Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Evercoss R40C:If you would like to know how to root your Evercoss R40C android device, drop a comment below. We will share the tutorial for your device as quickly as possible .