Home / Evercoss / Evercoss R6
How To Flash Stock Rom Firmware On Evercoss R6

How To Flash Stock Rom Firmware On Evercoss R6

These are the instructions to download Flash or install Stock Firmware (ROM) on Evercoss R6 (Original firmware) , If you searching for the Evercoss R6 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Evercoss R6 , Here you can download the Official Evercoss R6 Stock Firmware ROM (flash file) on your Computer

Download Evercoss R6 Stock Rom (Original firmware)

Requirements: Your Evercoss R6 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Evercoss_R6_V18_20170313_6.0_SPD-[flash-file.net].zip
Flash File Size: 884 MB
Flash Tool Link: SPD Flash Tool

Download Flash File

How to Flash Stock Firmware ROM on Evercoss R6

To install the Stock Firmware on Evercoss R6 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Evercoss R6 .

Step 1: Download and Install Evercoss R6 USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.

Step 2: After Download Stock Rom (pac) for your Evercoss R6 Device.

Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files:How To Flash Stock Rom Firmware On Evercoss R6 Step 4: Now, open UpgradeDownload.exe.How To Flash Stock Rom Firmware On Evercoss R6 Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Evercoss R6 Device to the computer (make sure your Android Device is switch off).

How To Flash Stock Rom Firmware On Evercoss R6

Step 6: Once your Evercoss R6 is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac).How To Flash Stock Rom Firmware On Evercoss R6 Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.

How To Flash Stock Rom Firmware On Evercoss R6

Step 8: During the flashing process your Evercoss R6 Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool. How To Flash Stock Rom Firmware On Evercoss R6 How To Flash Stock Rom Firmware On Evercoss R6

Step 9: Now you have successfully flashed your Evercoss R6 using Spreadtrum Upgrade Tool. Once your Evercoss R6 Device is successfully restarted, Go to Settings About Phone Check firmware..

Congratulations, Now you have successfully flashed the stock firmware on your Evercoss R6 using Spreadtrum Upgrade Tool

Keep in mind:

[*] Evercoss R6 Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing Evercoss R6 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Evercoss R6:If you would like to know how to root your Evercoss R6 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

How To Flash Stock Rom Firmware On Evercoss A76

Evercoss A76

These are the instructions to download Flash or install Stock Firmware (ROM) on Evercoss A76 …

Leave a Reply

%d bloggers like this: