These are the instructions to download Flash or install Stock Firmware (ROM) on EyePay IG-EP100 (Original firmware) , If you searching for the EyePay IG-EP100 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on EyePay IG-EP100 , Here you can download the Official EyePay IG-EP100Stock Firmware ROM (flash file) on your Computer .
DownloadEyePay IG-EP100 Stock Rom (Original firmware)
Requirements: Your EyePay IG-EP100 Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: EyePay_IG-EP100_MT6737M_20180928_8.1.0-[flash-file.net].zip
Flash File Size: 1 GB
How to Flash Stock Firmware ROM on EyePay IG-EP100
To install the Stock Firmware on EyePay IG-EP100 Stock , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on EyePay IG-EP100 .
STEP 1: Download and Install the EyePay IG-EP100 USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your EyePay IG-EP100 device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your EyePay IG-EP100 to your system using the USB cable and , press any button other than power button so that your system will detect your EyePay IG-EP100 Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your EyePay IG-EP100 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your EyePay IG-EP100 using SP Flash Tool.
Keep in mind:
[*] EyePay IG-EP100 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing EyePay IG-EP100 Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Caution]: On Mediatek powered devices, We do NOT recommend to Flash the Preloader.bin. As it may brick the device, therefore we recommend you to Untick the Preloader while Flashing the firmware.
[*] Broken link Report here.
[*] ROOT EyePay IG-EP100:If you would like to know how to root your EyePay IG-EP100 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .