Home / Gblack / Gblack J300 Pro

How To Flash Stock Rom Firmware On Gblack J300 Pro

These are the instructions to download Flash or install Stock Firmware (ROM) on Gblack J300 Pro (Original firmware) , If you searching for the Gblack J300 Pro Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Gblack J300 Pro , Here you can download the Official Gblack J300 ProStock Firmware ROM (flash file) on your Computer .

DownloadGblack J300 Pro Stock Rom (Original firmware)

Requirements: Your Gblack J300 Pro Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Gblack_J300_Pro_MT6580_20180627_5.1-[flash-file.net].zip
Flash File Size: 571 MB

Download Flash File

How to Flash Stock Firmware ROM on Gblack J300 Pro

To install the Stock Firmware on Gblack J300 Pro Stock , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Gblack J300 Pro .

STEP 1: Download and Install the Gblack J300 Pro USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Gblack J300 Pro device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.Guide To flash Official Stock ROM On Android Device STEP 5: Form the files listed run the Flash_tool.exe file.

Guide To flash Official Stock ROM On Android DeviceGuide To flash Official Stock ROM On Android Device

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. Guide To flash Official Stock ROM On Android Device STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Gblack J300 Pro to your system using the USB cable and , press any button other than power button so that your system will detect your Gblack J300 Pro Device. You can use volume buttons. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Gblack J300 Pro and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Gblack J300 Pro using SP Flash Tool.

Keep in mind:

[*] Gblack J300 Pro Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Gblack J300 Pro Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Caution]: On Mediatek powered devices, We do NOT recommend to Flash the Preloader.bin. As it may brick the device, therefore we recommend you to Untick the Preloader while Flashing the firmware.

[*] Broken link Report here.

[*] ROOT Gblack J300 Pro:If you would like to know how to root your Gblack J300 Pro android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Gblack J500 Pro

These are the instructions to download Flash or install Stock Firmware (ROM) on Gblack J500 …

Leave a Reply

Your email address will not be published. Required fields are marked *