How To Flash Stock Rom Firmware On Ginger G10

These are the instructions to download Flash or install Stock Firmware (ROM) on Ginger G10 (Original firmware) , If you searching for the Ginger G10 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Ginger G10 , Here you can download the Official Ginger G10 Stock Firmware ROM (flash file) on your Computer.

DownloadGinger G10 Stock Rom (Original firmware)

Requirements: Your Ginger G10 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Ginger_G10_SC6820_2.3.5_SPD-[flash-file.net].zip
Flash File Size: 178 MB
Flash Tool Link: SPD Flash Tool

Download Flash File

How to Flash Stock Firmware ROM on Ginger G10

To install the Stock Firmware on the Ginger G10 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Ginger G10 .

Step 1: Download and Install Ginger G10 USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.

Step 2: After Download Stock Rom (pac) for your Ginger G10 Device.

Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Ginger G10 Device to the computer (make sure your Android Device is switch off).

Step 6: Once your Ginger G10 is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac). Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.

Step 8: During the flashing process your Ginger G10 Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.

Step 9: Now you have successfully flashed your Ginger G10 using Spreadtrum Upgrade Tool. Once your Ginger G10 Device is successfully restarted, Go to Settings About Phone Check firmware..

Congratulations, Now you have successfully flashed the stock firmware on your Ginger G10 using Spreadtrum Upgrade Tool

Keep in mind:

[*] Ginger G10 Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool for WINDOWS .

[*] Backup Please: Take a backup of your important data before Flashing Ginger G10 Stock Firmware as because during the flashing process your personal data will be removed permanently .

[*] Broken link Report here.

[*] ROOT Ginger G10:If you would like to know how to root your Ginger G10 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .