Home / Hitech / Hitech S300i

How To Flash Stock Rom Firmware On Hitech S300i

These are the instructions to download Flash or install Stock Firmware (ROM) on Hitech S300i (Original firmware) , If you searching for the Hitech S300i Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Hitech S300i , Here you can download the Official Hitech S300i Stock Firmware ROM (flash file) on your Computer

Download Hitech S300i Stock Rom (Original firmware)

Requirements: Your Hitech S300i Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Hitech_S300i_20141124_V1.0_RDA_Total-[flash-file.net].zip
Flash File Size: 159 MB

Download Flash File

How to Flash Stock Firmware ROM on Hitech S300i

To install the Stock Firmware on Hitech S300i , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Hitech S300i .

Step 1: Download and install the RDA USB Drivers on your Computer. If RDA Drivers are already installed on your computer then Skip this Step. USB Logo Step 2: Download and extract Multi IEdownload Tool on your computer. After extracting, you will be able to see the following files: Multi_IEdownload_Files Step 3: Now, Open Multi_IEdownload_eng.exe. Multi_IEdownload Step 4: Once Multi IEdownload Tool is launched, you will be able to see the following screen: Step 5: Now, Click on the browse button and locate the RDA Bin file from your computer. Step 6: Now, connect your Hitech S300i to the computer (make sure Hitech S300i is power off and battery is not removed). Step 7: Now, click on the Start All button to begin the flashing process. Step 8: Flashing process will take few minutes to flash the firmware on your Hitech S300i. Once flashing is completed you will be able to see the success message on the screen.

Congratulations, Now you have successfully flashed the stock firmware on your Hitech S300i using Multi IEdownload Tool

Keep in mind:

[*] Backup Please: Take a backup of your important data before Flashing Hitech S300i Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Hitech S300i:If you would like to know how to root your Hitech S300i android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Hitech Amaze Tab V500

These are the instructions to download Flash or install Stock Firmware (ROM) on Hitech Amaze …

Leave a Reply

Your email address will not be published.