Home / Tutorial / How to Flash Sony Xperia Stock Rom using FlashTool

How To Flash Stock Rom Firmware On How to Flash Sony Xperia Stock Rom using FlashTool

These are the instructions to download Flash or install Stock Firmware (ROM) on How to Flash Sony Xperia Stock Rom using FlashTool (Original firmware) , If you searching for the How to Flash Sony Xperia Stock Rom using FlashTool Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on How to Flash Sony Xperia Stock Rom using FlashTool , Here you can download the Official

These are the instructions to flash Sony Xperia Stock Rom (ftf firmware) using the Xperia Flash Tool on Windows Computer.

Requirements]: Your Xperia device should have atleast 30-40 percent of phone battery to perform the flashing process.

Flash Sony Xperia Stock Rom using FlashTool

STEP [1]: Download and install Sony Xperia Driver on your computer. If in case Sony Xperia driver is already installed on your computer then SKIP this step.

usb logo

STEP [2]: Download and extract Sony Xperia Firmware on your computer. After extracting you will be able to see similar file (with .ftf extension):

xperia firmware file

STEP [3]: Download and install Sony Xperia Flashtool on your computer (if you have already having the FlashTool, then there is no need to download it again).

Xperia Flashtool Install

STEP [4]: Once Sony Xperia Flashtool is installed, Open it from C:Drive > Flashtool.

flashtool open

STEP [5]: Once Sony Xperia Flashtool is launched, you will be able to see the following screen:

sony mobile flasher androxyde

>

STEP [6]: Now, click on the Flash Button.

sony mobile flasher flash button

STEP [7]: Now, you will be able to see the Bootmode Chooser menu. Select Flashboot option and click on OK button.

sony mobile flasher flashmode

(adsbygoogle = window.adsbygoogle || []).push({});

STEP [8]: Now, load the downloaded xperia firmware (.ftf) in the flashtool. By clicking on the Load Button.

sony mobile flasher locate

sony mobile flasher firmware select

STEP [9]: Now, Select the loaded Firmware.

select firmware xperia flashtool

(adsbygoogle = window.adsbygoogle || []).push({});

STEP [10]: Now, Click on the Flash button to begin the flashing process.

sony mobile flasher start flash

STEP [11]: Now, Power off your Xperia Device.

STEP [12]: Now, Press and Hold Volume Down button and connect the device to the computer using the USB cable.

mobile usb computer

STEP [13]: Once the device is successfully connected to the computer then you will be able to see the added message in Xperia Flashtool.

STEP [14]: Now, flashing will begin and will take 5-10 minutes to complete.

STEP [15]: Once flashing process is completed, disconnect your device from the computer and Turn it On.

Keep in Mind]:

[*] Data Loss Process]: Flashing the stock firmware is always a data loss process. So, always take a backup of your personal data before flashing the stock firmware.

[*] Sony Xperia Firmware]: If you are looking for the original firmware for your device then head over to Download Sony Stock Firmware for all devices .

[*] Sony Xperia Driver]: If you are looking for the original USB Driver for your device then head over to Download Sony USB Driver for all devices .

[*] Credits]: Xperia FlashTool was created by Androxyde. So, full credits goes to them for creating the Application for free.

[*] ROOT How to Flash Sony Xperia Stock Rom using FlashTool:If you would like to know how to root your How to Flash Sony Xperia Stock Rom using FlashTool android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Leave a Reply

Your email address will not be published. Required fields are marked *