How To Flash Stock Rom Firmware On Huawei Y520-U22

These are the instructions to download Flash or install Stock Firmware (ROM) on Huawei Y520-U22 (Original firmware) , If you searching for the Huawei Y520-U22 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Huawei Y520-U22 , Here you can download the Official Huawei Y520-U22 Stock Firmware ROM (flash file) on your Computer

Download Huawei Y520-U22 Stock Rom (Original firmware)

Requirements: Your Huawei Y520-U22 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Huawei_Y520-U22_MT6582-[flash-file.net].zip
Flash File Size: 640 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

---

Flash File Name: Huawei_Y520-U22_MT6572_V100R001C567B108_South_East_Asia_South_Pacific_Region.zip
ROM Country: South East Asia South Pacific Region
Flash File Size: 553 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Huawei Y520-U22

To install the Stock Firmware on Huawei Y520-U22 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Huawei Y520-U22 .

STEP 1: Download and Install the Huawei Y520-U22 USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Huawei Y520-U22 device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Huawei Y520-U22 to your system using the USB cable and , press any button other than power button so that your system will detect your Huawei Y520-U22 Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Huawei Y520-U22 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Huawei Y520-U22 using SP Flash Tool.

Keep in mind:

[*] Huawei Y520-U22 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Huawei Y520-U22 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Huawei Y520-U22:If you would like to know how to root your Huawei Y520-U22 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .