Home / iBall / iBall Andi 3.5 KKe Super

How To Flash Stock Rom Firmware On iBall Andi 3.5 KKe Super

These are the instructions to download Flash or install Stock Firmware (ROM) on iBall Andi 3.5 KKe Super (Original firmware) , If you searching for the iBall Andi 3.5 KKe Super Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on iBall Andi 3.5 KKe Super , Here you can download the Official iBall Andi 3.5 KKe Super Stock Firmware ROM (flash file) on your Computer

Download iBall Andi 3.5 KKe Super Stock Rom (Original firmware)

Requirements: Your iBall Andi 3.5 KKe Super Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: iBall_Andi_3.5_KKe_Super_New_LCD-[flash-file.net].zip
Flash File Size: 285 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File


Flash File Name: iBall_Andi_3.5_KKe_Super_SW_14.02.2014-[flash-file.net].zip
Flash File Size: 280 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on iBall Andi 3.5 KKe Super

To install the Stock Firmware on iBall Andi 3.5 KKe Super , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on iBall Andi 3.5 KKe Super .

STEP 1: Download and Install the iBall Andi 3.5 KKe Super USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your iBall Andi 3.5 KKe Super device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.How To Flash Stock Rom Firmware On iBall Andi 3.5 KKe Super STEP 5: Form the files listed run the Flash_tool.exe file.

How To Flash Stock Rom Firmware On iBall Andi 3.5 KKe SuperHow To Flash Stock Rom Firmware On iBall Andi 3.5 KKe Super

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. How To Flash Stock Rom Firmware On iBall Andi 3.5 KKe Super STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. How To Flash Stock Rom Firmware On iBall Andi 3.5 KKe Super STEP 9: After completed all the above steps, connect your iBall Andi 3.5 KKe Super to your system using the USB cable and , press any button other than power button so that your system will detect your iBall Andi 3.5 KKe Super Device. You can use volume buttons. How To Flash Stock Rom Firmware On iBall Andi 3.5 KKe Super How To Flash Stock Rom Firmware On iBall Andi 3.5 KKe Super Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your iBall Andi 3.5 KKe Super and switch it ON.How To Flash Stock Rom Firmware On iBall Andi 3.5 KKe SuperHow To Flash Stock Rom Firmware On iBall Andi 3.5 KKe SuperCongratulations, Now you have successfully flashed the stock firmware on your iBall Andi 3.5 KKe Super using SP Flash Tool.

Keep in mind:

[*] iBall Andi 3.5 KKe Super Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing iBall Andi 3.5 KKe Super Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT iBall Andi 3.5 KKe Super:If you would like to know how to root your iBall Andi 3.5 KKe Super android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

How To Flash Stock Rom Firmware On iBall Slide i5715

iBall Slide i5715

These are the instructions to download Flash or install Stock Firmware (ROM) on iBall Slide …

Leave a Reply

%d bloggers like this: