How To Flash Stock Rom Firmware On Icex Xtreme Connect

These are the instructions to download Flash or install Stock Firmware (ROM) on Icex Xtreme Connect (Original firmware) , If you searching for the Icex Xtreme Connect Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Icex Xtreme Connect , Here you can download the Official Icex Xtreme ConnectStock Firmware ROM (flash file) on your Computer .

DownloadIcex Xtreme Connect Stock Rom (Original firmware)

Requirements: Your Icex Xtreme Connect Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Icex_Xtreme_Connect_V011_22062013_RC-[flash-file.net].zip
Flash File Size: 353 MB

Download Flash File

How to Flash Stock Firmware ROM on Icex Xtreme Connect

To install the Stock Firmware on Icex Xtreme Connect Stock , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Icex Xtreme Connect .

Step 1: Download and install Rockchip Driver Assistant on your computer. Step 2: Download and extract RockChip Batch Tool on your computer. After Extracting you will be able to see the following files: Step 3: Now open RKBatchTool.exe from the extracted files. Step 4: Once RKBatchTool.exe is launched, Click on the Box right to the FW Path.   Step 5: Once you have succesfully added the firmware, RockChip Tool will load it. Step 6: Now, Turn Off your Icex Xtreme Connect Device and tablets. Step 7: Now, Press and Hold Volume UP Key on your Icex Xtreme Connect Device and connect it to the computer using the USB cable.

Step 8: Do not release the Volume UP Key on your Icex Xtreme Connect Device until Icon 1 turns Green in Color. Step 9: Once your Icex Xtreme Connect Device is successfully added to the computer, Click on the Restore Button to begin the Flashing process. Step 10: Now, RockChip Batch Tool will Flash the Firmware on your Icex Xtreme Connect Device (flashing usually takes 4-6 minutes to complete).

Step 13: Once Flashing is completed successfully then you will be able to see Restore Done Success Message. Step 14: Now, close RockChip Batch Tool by clicking on the Exit Button.

  Step 15: Disconnect your Icex Xtreme Connect Device from the Computer and Restart it.

Congratulations, Now you have successfully flashed the stock firmware on your Icex Xtreme Connect using RockChip Batch Tool.

Keep in mind:

[*] Icex Xtreme Connect Flash Tool: If you need to download the latest version of Rockchip Batch Tool, then head over to Rockchip Batch Tool for WINDOWS .

[*] Backup Please: Take a backup of your important data before Flashing Icex Xtreme Connect Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Icex Xtreme Connect:If you would like to know how to root your Icex Xtreme Connect android device, drop a comment below. We will share the tutorial for your device as quickly as possible .