How To Flash Stock Rom Firmware On Infinix Zero 3 X552 Clone

These are the instructions to download Flash or install Stock Firmware (ROM) on Infinix Zero 3 X552 Clone (Original firmware) , If you searching for the Infinix Zero 3 X552 Clone Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Infinix Zero 3 X552 Clone , Here you can download the Official Infinix Zero 3 X552 Clone Stock Firmware ROM (flash file) on your Computer.

DownloadInfinix Zero 3 X552 Clone Stock Rom (Original firmware)

Requirements: Your Infinix Zero 3 X552 Clone Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Infinix_Zero_3_X552_Clone_V08_S02_13122017_5.1_SPD-[flash-file.net].zip
Flash File Size: 820 MB
Flash Tool Link: SPD Flash Tool

Download Flash File

How to Flash Stock Firmware ROM on Infinix Zero 3 X552 Clone

To install the Stock Firmware on the Infinix Zero 3 X552 Clone , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Infinix Zero 3 X552 Clone .

Step 1: Download and Install Infinix Zero 3 X552 Clone USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.

Step 2: After Download Stock Rom (pac) for your Infinix Zero 3 X552 Clone Device.

Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Infinix Zero 3 X552 Clone Device to the computer (make sure your Android Device is switch off).

Step 6: Once your Infinix Zero 3 X552 Clone is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac). Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.

Step 8: During the flashing process your Infinix Zero 3 X552 Clone Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.

Step 9: Now you have successfully flashed your Infinix Zero 3 X552 Clone using Spreadtrum Upgrade Tool. Once your Infinix Zero 3 X552 Clone Device is successfully restarted, Go to Settings About Phone Check firmware..

Congratulations, Now you have successfully flashed the stock firmware on your Infinix Zero 3 X552 Clone using Spreadtrum Upgrade Tool

Keep in mind:

[*] Infinix Zero 3 X552 Clone Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool for WINDOWS .

[*] Backup Please: Take a backup of your important data before Flashing Infinix Zero 3 X552 Clone Stock Firmware as because during the flashing process your personal data will be removed permanently .

[*] Broken link Report here.

[*] ROOT Infinix Zero 3 X552 Clone:If you would like to know how to root your Infinix Zero 3 X552 Clone android device, drop a comment below. We will share the tutorial for your device as quickly as possible .