Home / Intex / Intex Aqua Style

How To Flash Stock Rom Firmware On Intex Aqua Style

These are the instructions to download Flash or install Stock Firmware (ROM) on Intex Aqua Style (Original firmware) , If you searching for the Intex Aqua Style Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Intex Aqua Style , Here you can download the Official Intex Aqua Style Stock Firmware ROM (flash file) on your Computer

Download Intex Aqua Style Stock Rom (Original firmware)

Requirements: Your Intex Aqua Style Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Intex_Aqua_Style_v08-[flash-file.net].zip
Flash File Size: 413 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Intex Aqua Style

To install the Stock Firmware on Intex Aqua Style , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Intex Aqua Style .

STEP 1: Download and Install the Intex Aqua Style USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Intex Aqua Style device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.How To Flash Stock Rom Firmware On Intex Aqua Style STEP 5: Form the files listed run the Flash_tool.exe file.

How To Flash Stock Rom Firmware On Intex Aqua StyleHow To Flash Stock Rom Firmware On Intex Aqua Style

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. How To Flash Stock Rom Firmware On Intex Aqua Style STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. How To Flash Stock Rom Firmware On Intex Aqua Style STEP 9: After completed all the above steps, connect your Intex Aqua Style to your system using the USB cable and , press any button other than power button so that your system will detect your Intex Aqua Style Device. You can use volume buttons. How To Flash Stock Rom Firmware On Intex Aqua Style How To Flash Stock Rom Firmware On Intex Aqua Style Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Intex Aqua Style and switch it ON.How To Flash Stock Rom Firmware On Intex Aqua StyleHow To Flash Stock Rom Firmware On Intex Aqua StyleCongratulations, Now you have successfully flashed the stock firmware on your Intex Aqua Style using SP Flash Tool.

Keep in mind:

[*] Intex Aqua Style Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Intex Aqua Style Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Intex Aqua Style:If you would like to know how to root your Intex Aqua Style android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

How To Flash Stock Rom Firmware On Intex Aqua V3G

Intex Aqua V3G

These are the instructions to download Flash or install Stock Firmware (ROM) on Intex Aqua …

Leave a Reply

%d bloggers like this: