How To Flash Stock Rom Firmware On Invens E12

These are the instructions to download Flash or install Stock Firmware (ROM) on Invens E12 (Original firmware) , If you searching for the Invens E12 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Invens E12 , Here you can download the Official Invens E12 Stock Firmware ROM (flash file) on your Computer.

Download Invens E12 Stock Rom (Original firmware)

Requirements: Your Invens E12 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Invens_E12_SP7731CEB_V01_TN_20180130_6.0_SPD-[flash-file.net].zip
Flash File Size: 547 MB

Download Flash File

How to Flash Stock Firmware ROM on Invens E12

To install the Stock Firmware on Invens E12 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Invens E12 .

Step 1: Download and Install Invens E12 USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.

Step 2: After Download Stock Rom (pac) for your Invens E12 Device.

Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Invens E12 Device to the computer (make sure your Android Device is switch off).

Step 6: Once your Invens E12 is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac). Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.

Step 8: During the flashing process your Invens E12 Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.

Step 9: Now you have successfully flashed your Invens E12 using Spreadtrum Upgrade Tool. Once your Invens E12 Device is successfully restarted, Go to Settings About Phone Check firmware..

Congratulations, Now you have successfully flashed the stock firmware on your Invens E12 using Spreadtrum Upgrade Tool

Keep in mind:

[*] Invens E12 Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool for WINDOWS .

[*] Backup Please: Take a backup of your important data before Flashing Invens E12 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Invens E12:If you would like to know how to root your Invens E12 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .