Flash Guide How to Flash a ROM to Your Android Phone
These are the instructions to download Flash or install Stock Firmware (ROM) on Invens F2 Fighter (Original firmware) , If you searching for the Invens F2 Fighter Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Invens F2 Fighter , Here you can download the Official Invens F2 Fighter Stock Firmware ROM (flash file) on your Computer.
Download Invens F2 Fighter Stock Rom (Original firmware)
Requirements: Your Invens F2 Fighter Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Invens_F2_Fighter_MT6580_11172017_6.0-[flash-file.net].zip
Flash File Size: 1 GB
How to Flash Stock Firmware ROM on Invens F2 Fighter
To install the Stock Firmware on Invens F2 Fighter , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Invens F2 Fighter .
STEP 1: Download and Install the Invens F2 Fighter USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Invens F2 Fighter device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.
STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. 
STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. 
STEP 9: After completed all the above steps, connect your Invens F2 Fighter to your system using the USB cable and , press any button other than power button so that your system will detect your Invens F2 Fighter Device. You can use volume buttons. 
Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Invens F2 Fighter and switch it ON.
Congratulations, Now you have successfully flashed the stock firmware on your Invens F2 Fighter using SP Flash Tool.
Keep in mind:
[*] Invens F2 Fighter Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing Invens F2 Fighter Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Caution]: 8888888874445566688 Preloader.bin 8888845214444558662ش.
[*] Broken link Report here.
[*] ROOT Invens F2 Fighter:If you would like to know how to root your Invens F2 Fighter android device, drop a comment below. We will share the tutorial for your device as quickly as possible .
