How To Flash Stock Rom Firmware On iPro I3181

These are the instructions to download Flash or install Stock Firmware (ROM) on iPro I3181 (Original firmware) , If you searching for the iPro I3181 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on iPro I3181 , Here you can download the Official iPro I3181 Stock Firmware ROM (flash file) on your Computer.

DownloadiPro I3181 Stock Rom (Original firmware)

Requirements: Your iPro I3181 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: iPro_I3181_SC6531_V0.7_SPD-[flash-file.net].zip
Flash File Size: 4 MB
Flash Tool Link: SPD Flash Tool

Download Flash File

How to Flash Stock Firmware ROM on iPro I3181

To install the Stock Firmware on the iPro I3181 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on iPro I3181 .

Step 1: Download and Install iPro I3181 USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.

Step 2: After Download Stock Rom (pac) for your iPro I3181 Device.

Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your iPro I3181 Device to the computer (make sure your Android Device is switch off).

Step 6: Once your iPro I3181 is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac). Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.

Step 8: During the flashing process your iPro I3181 Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.

Step 9: Now you have successfully flashed your iPro I3181 using Spreadtrum Upgrade Tool. Once your iPro I3181 Device is successfully restarted, Go to Settings About Phone Check firmware..

Congratulations, Now you have successfully flashed the stock firmware on your iPro I3181 using Spreadtrum Upgrade Tool

Keep in mind:

[*] iPro I3181 Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool for WINDOWS .

[*] Backup Please: Take a backup of your important data before Flashing iPro I3181 Stock Firmware as because during the flashing process your personal data will be removed permanently .

[*] Broken link Report here.

[*] ROOT iPro I3181:If you would like to know how to root your iPro I3181 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .