These are the instructions to download Flash or install Stock Firmware (ROM) on Irbis SP455 (Original firmware) , If you searching for the Irbis SP455 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Irbis SP455 , Here you can download the Official Irbis SP455Stock Firmware ROM (flash file) on your Computer .
DownloadIrbis SP455 Stock Rom (Original firmware)
Requirements: Your Irbis SP455 Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Irbis_SP455_MT6737M_20170315_7.0-[flash-file.net].zip
Flash File Size: 939 MB
How to Flash Stock Firmware ROM on Irbis SP455
To install the Stock Firmware on Irbis SP455 Stock , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Irbis SP455 .
STEP 1: Download and Install the Irbis SP455 USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Irbis SP455 device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Irbis SP455 to your system using the USB cable and , press any button other than power button so that your system will detect your Irbis SP455 Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Irbis SP455 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Irbis SP455 using SP Flash Tool.
Keep in mind:
[*] Backup Please: Take a backup of your important data before Flashing Irbis SP455 Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Caution]: On Mediatek powered devices, We do NOT recommend to Flash the Preloader.bin. As it may brick the device, therefore we recommend you to Untick the Preloader while Flashing the firmware.
[*] Broken link Report here.
[*] ROOT Irbis SP455:If you would like to know how to root your Irbis SP455 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .