Home / Irbis / Irbis TX01

How To Flash Stock Rom Firmware On Irbis TX01

These are the instructions to download Flash or install Stock Firmware (ROM) on Irbis TX01 (Original firmware) , If you searching for the Irbis TX01 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Irbis TX01 , Here you can download the Official Irbis TX01Stock Firmware ROM (flash file) on your Computer .

DownloadIrbis TX01 Stock Rom (Original firmware)

Requirements: Your Irbis TX01 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Irbis_TX01_v2.0_20150522_4.4.2_LS-[flash-file.net].zip
Flash File Size: 647 MB

Download Flash File

How to Flash Irbis TX01

To install the Stock Firmware on Irbis TX01 Stock , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Irbis TX01 .

Step 1: Download and install Irbis TX01 ADB Drivers on your computer. How To Flash Stock Rom Firmware On Irbis TX01 Step 2: Download and extract LiveSuit Application on your computer. After Extracting you will be able to see the following files: How To Flash Stock Rom Firmware On Irbis TX01 Step 3: Now LiveSuit.exe from the extracted files. How To Flash Stock Rom Firmware On Irbis TX01 Step 4: Once LiveSuit.exe is launched, Select Yes to follow the Upgrade Wizard.How To Flash Stock Rom Firmware On Irbis TX01   Step 5: Now, You have to select the Upgrade Mode which is General and Mandatory. Click on Mandatory to continue.How To Flash Stock Rom Firmware On Irbis TX01   Step 6: Now, Unplug all the connected Irbis TX01 device from the computer (if you have already connected), then Click on Yes button to Continue.How To Flash Stock Rom Firmware On Irbis TX01   Step 7: Next, You have to select the .img firmware. If you are ready Click on Yes Button and select the firmware. How To Flash Stock Rom Firmware On Irbis TX01 How To Flash Stock Rom Firmware On Irbis TX01 Step 8: Now, Dont Click on Finish Button.

Step 9: Now, It is the right time to connect your Irbis TX01 device to the Computer using USB Cable. Before Connecting the Irbis TX01 device, make sure its Power Off. Firstly Connect the USB Cable to the Computer then on your Irbis TX01 device Press Volume Down Key and Connect the USB Cable to it. While holding the Volume Down Key immediately Press Power Key for 10 times, so that the computer can recognize your Android device.

Step 10: Once your Irbis TX01 device is successfully recognized by your computer, you will be able to see the following Window saying to Mandatory Format the Device. Click on Yes to Continue. How To Flash Stock Rom Firmware On Irbis TX01 Step 11: On the next Windows, again click on Yes Button to continue.

Step 12: Now LiveSuite will start the flashing process (flashing usually takes 4-6 minutes to complete). How To Flash Stock Rom Firmware On Irbis TX01 Step 13: Once Flashing is completed successfully then you will be able to see Upgrade Succeeds Window. Click on OK to Close it. How To Flash Stock Rom Firmware On Irbis TX01 Step 14: Now, close LiveSuit Application by clicking on the Exit Button. How To Flash Stock Rom Firmware On Irbis TX01 Step 15: Disconnect your Android device from the Computer and Restart it.

Congratulations, Now you have successfully flashed the stock firmware on your Irbis TX01 using LiveSuit Application.

Keep in mind:

[*] Irbis TX01 Flash Tool: If you need to download the latest version of Livesuit Flash Tool, then head over to Livesuit Flash Tool for WINDOWS .

[*] Backup Please: Take a backup of your important data before Flashing Irbis TX01 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Irbis TX01:If you would like to know how to root your Irbis TX01 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

How To Flash Stock Rom Firmware On Irbis SP455

Irbis SP455

These are the instructions to download Flash or install Stock Firmware (ROM) on Irbis SP455 …

Home / Irbis / Irbis TX01

How To Flash Stock Rom Firmware On Irbis TX01

These are the instructions to download Flash or install Stock Firmware (ROM) on Irbis TX01 (Original firmware) , If you searching for the Irbis TX01 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Irbis TX01 , Here you can download the Official Irbis TX01Stock Firmware ROM (flash file) on your Computer .

DownloadIrbis TX01 Stock Rom (Original firmware)

Requirements: Your Irbis TX01 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Irbis_TX01_v2.0_20150522_4.4.2_LS-[flash-file.net].zip
Flash File Size: 647 MB

Download Flash File

How to Flash Irbis TX01

To install the Stock Firmware on Irbis TX01 Stock , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Irbis TX01 .

Step 1: Download and install Irbis TX01 ADB Drivers on your computer. How To Flash Stock Rom Firmware On Irbis TX01 Step 2: Download and extract LiveSuit Application on your computer. After Extracting you will be able to see the following files: How To Flash Stock Rom Firmware On Irbis TX01 Step 3: Now LiveSuit.exe from the extracted files. How To Flash Stock Rom Firmware On Irbis TX01 Step 4: Once LiveSuit.exe is launched, Select Yes to follow the Upgrade Wizard.How To Flash Stock Rom Firmware On Irbis TX01   Step 5: Now, You have to select the Upgrade Mode which is General and Mandatory. Click on Mandatory to continue.How To Flash Stock Rom Firmware On Irbis TX01   Step 6: Now, Unplug all the connected Irbis TX01 device from the computer (if you have already connected), then Click on Yes button to Continue.How To Flash Stock Rom Firmware On Irbis TX01   Step 7: Next, You have to select the .img firmware. If you are ready Click on Yes Button and select the firmware. How To Flash Stock Rom Firmware On Irbis TX01 How To Flash Stock Rom Firmware On Irbis TX01 Step 8: Now, Dont Click on Finish Button.

Step 9: Now, It is the right time to connect your Irbis TX01 device to the Computer using USB Cable. Before Connecting the Irbis TX01 device, make sure its Power Off. Firstly Connect the USB Cable to the Computer then on your Irbis TX01 device Press Volume Down Key and Connect the USB Cable to it. While holding the Volume Down Key immediately Press Power Key for 10 times, so that the computer can recognize your Android device.

Step 10: Once your Irbis TX01 device is successfully recognized by your computer, you will be able to see the following Window saying to Mandatory Format the Device. Click on Yes to Continue. How To Flash Stock Rom Firmware On Irbis TX01 Step 11: On the next Windows, again click on Yes Button to continue.

Step 12: Now LiveSuite will start the flashing process (flashing usually takes 4-6 minutes to complete). How To Flash Stock Rom Firmware On Irbis TX01 Step 13: Once Flashing is completed successfully then you will be able to see Upgrade Succeeds Window. Click on OK to Close it. How To Flash Stock Rom Firmware On Irbis TX01 Step 14: Now, close LiveSuit Application by clicking on the Exit Button. How To Flash Stock Rom Firmware On Irbis TX01 Step 15: Disconnect your Android device from the Computer and Restart it.

Congratulations, Now you have successfully flashed the stock firmware on your Irbis TX01 using LiveSuit Application.

Keep in mind:

[*] Irbis TX01 Flash Tool: If you need to download the latest version of Livesuit Flash Tool, then head over to Livesuit Flash Tool for WINDOWS .

[*] Backup Please: Take a backup of your important data before Flashing Irbis TX01 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Irbis TX01:If you would like to know how to root your Irbis TX01 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

How To Flash Stock Rom Firmware On Irbis SP455

Irbis SP455

These are the instructions to download Flash or install Stock Firmware (ROM) on Irbis SP455 …

Leave a Reply