How To Flash Stock Rom Firmware On Kaicom V5 DPM

These are the instructions to download Flash or install Stock Firmware (ROM) on Kaicom V5 DPM (Original firmware) , If you searching for the Kaicom V5 DPM Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Kaicom V5 DPM , Here you can download the Official Kaicom V5 DPM Stock Firmware ROM (flash file) on your Computer.

Download Kaicom V5 DPM Stock Rom (Original firmware)

Requirements: Your Kaicom V5 DPM Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Kaicom_V5_DPM_MT6582_20180525_4.4.2-[flash-file.net].zip
Flash File Size: 259 MB

Download Flash File

---

Flash File Name: Kaicom_V5_DPM_MT6582_20180525_4.4.2-[flash-file.net].zip
Flash File Size: 980 MB

Download Flash File

How to Flash Stock Firmware ROM on Kaicom V5 DPM

To install the Stock Firmware on Kaicom V5 DPM , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Kaicom V5 DPM .

STEP 1: Download and Install the Kaicom V5 DPM USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Kaicom V5 DPM device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Kaicom V5 DPM to your system using the USB cable and , press any button other than power button so that your system will detect your Kaicom V5 DPM Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Kaicom V5 DPM and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Kaicom V5 DPM using SP Flash Tool.

Keep in mind:

[*] Kaicom V5 DPM Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Kaicom V5 DPM Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Caution]: 8888888874445566688 Preloader.bin 8888845214444558662ش.

[*] Broken link Report here.

[*] ROOT Kaicom V5 DPM:If you would like to know how to root your Kaicom V5 DPM android device, drop a comment below. We will share the tutorial for your device as quickly as possible .