These are the instructions to download Flash or install Stock Firmware (ROM) on Karbonn V5006 AG (Original firmware) , If you searching for the Karbonn V5006 AG Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Karbonn V5006 AG , Here you can download the Official Karbonn V5006 AG Stock Firmware ROM (flash file) on your Computer
Download Karbonn V5006 AG Stock Rom (Original firmware)
Requirements: Your Karbonn V5006 AG Device should have at least 40-50 percent of battery to perform the Flashing Process.
How to Flash Stock Firmware ROM on Karbonn V5006 AG
To install the Stock Firmware on Karbonn V5006 AG , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Karbonn V5006 AG .
STEP 1: Download and Install the Karbonn V5006 AG USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Karbonn V5006 AG device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Karbonn V5006 AG to your system using the USB cable and , press any button other than power button so that your system will detect your Karbonn V5006 AG Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Karbonn V5006 AG and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Karbonn V5006 AG using SP Flash Tool.
Keep in mind:
[*] Backup Please: Take a backup of your important data before Flashing Karbonn V5006 AG Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Karbonn V5006 AG:If you would like to know how to root your Karbonn V5006 AG android device, drop a comment below. We will share the tutorial for your device as quickly as possible .