How To Flash Stock Rom Firmware On Keneksi Solo

These are the instructions to download Flash or install Stock Firmware (ROM) on Keneksi Solo (Original firmware) , If you searching for the Keneksi Solo Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Keneksi Solo , Here you can download the Official Keneksi Solo Stock Firmware ROM (flash file) on your Computer.

DownloadKeneksi Solo Stock Rom (Original firmware)

Requirements: Your Keneksi Solo Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Keneksi_Solo_v1.0_MT6572_20140609-[flash-file.net].zip
Flash File Size: 535 MB
ROM Android Version: 4.2.2
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

---

Flash File Name: Keneksi_Solo_MT6572_20140609_4.2.2-[flash-file.net].zip
Flash File Size: 278 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Keneksi Solo

To install the Stock Firmware on the Keneksi Solo , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Keneksi Solo .

STEP 1: Download and Install the Keneksi Solo USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Keneksi Solo device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Keneksi Solo to your system using the USB cable and , press any button other than power button so that your system will detect your Keneksi Solo Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Keneksi Solo and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Keneksi Solo using SP Flash Tool.

Keep in mind:

[*] Keneksi Solo Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Keneksi Solo Stock Firmware as because during the flashing process your personal data will be removed permanently .

[*] Broken link Report here.

[*] ROOT Keneksi Solo:If you would like to know how to root your Keneksi Solo android device, drop a comment below. We will share the tutorial for your device as quickly as possible .