How To Flash Stock Rom Firmware On Kingstar A17

These are the instructions to download Flash or install Stock Firmware (ROM) on Kingstar A17 (Original firmware) , If you searching for the Kingstar A17 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Kingstar A17 , Here you can download the Official Kingstar A17 Stock Firmware ROM (flash file) on your Computer

Download Kingstar A17 Stock Rom (Original firmware)

Requirements: Your Kingstar A17 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Kingstar_A17_S12A_T8_77_BD_V01_EN_20130403-[flash-file.net].zip
Flash File Size: 272 MB
ROM Android Version: 4.0.4
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

---

Flash File Name: Kingstar_A17_MT6577_V05_20130516_4.0.4_SPD-[flash-file.net].zip
Flash File Size: 203 MB
ROM Android Version: 4.0.4
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Kingstar A17

To install the Stock Firmware on Kingstar A17 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Kingstar A17 .

STEP 1: Download and Install the Kingstar A17 USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Kingstar A17 device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Kingstar A17 to your system using the USB cable and , press any button other than power button so that your system will detect your Kingstar A17 Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Kingstar A17 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Kingstar A17 using SP Flash Tool.

Keep in mind:

[*] Kingstar A17 Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing Kingstar A17 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Kingstar A17:If you would like to know how to root your Kingstar A17 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .