How To Flash Stock Rom Firmware On LG K10 Clone

These are the instructions to download Flash or install Stock Firmware (ROM) on LG K10 Clone (Original firmware) , If you searching for the LG K10 Clone Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on LG K10 Clone , Here you can download the Official LG K10 Clone Stock Firmware ROM (flash file) on your Computer

Download LG K10 Clone Stock Rom (Original firmware)

Requirements: Your LG K10 Clone Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: LG_K10_Clone_MT6580_27042016_5.1-[flash-file.net].zip
Flash File Size: 530 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on LG K10 Clone

To install the Stock Firmware on LG K10 Clone , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on LG K10 Clone .

STEP 1: Download and Install the LG K10 Clone USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your LG K10 Clone device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your LG K10 Clone to your system using the USB cable and , press any button other than power button so that your system will detect your LG K10 Clone Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your LG K10 Clone and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your LG K10 Clone using SP Flash Tool.

Keep in mind:

[*] LG K10 Clone Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing LG K10 Clone Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT LG K10 Clone:If you would like to know how to root your LG K10 Clone android device, drop a comment below. We will share the tutorial for your device as quickly as possible .