These are the instructions to download Flash or install Stock Firmware (ROM) on Liven D4 (Original firmware) , If you searching for the Liven D4 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Liven D4 , Here you can download the Official Liven D4 Stock Firmware ROM (flash file) on your Computer.
Download Liven D4 Stock Rom (Original firmware)
Requirements: Your Liven D4 Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Liven_D4_MT6572_20180524_4.4.2-[flash-file.net].zip
Flash File Size: 488 MB
How to Flash Stock Firmware ROM on Liven D4
To install the Stock Firmware on Liven D4 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Liven D4 .
STEP 1: Download and Install the Liven D4 USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Liven D4 device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
![Guide To flash Official Stock ROM On Android Device](https://flash-guide.com/wp-content/uploads/2018/04/sptool-techsultan-2.png)
![Guide To flash Official Stock ROM On Android Device](https://flash-guide.com/wp-content/uploads/2018/04/2.gif)
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process.
STEP 9: After completed all the above steps, connect your Liven D4 to your system using the USB cable and , press any button other than power button so that your system will detect your Liven D4 Device. You can use volume buttons.
Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Liven D4 and switch it ON.
Congratulations, Now you have successfully flashed the stock firmware on your Liven D4 using SP Flash Tool.
Keep in mind:
[*] Liven D4 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing Liven D4 Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Caution]: 8888888874445566688 Preloader.bin 8888845214444558662ش.
[*] Broken link Report here.
[*] ROOT Liven D4:If you would like to know how to root your Liven D4 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .