How To Flash Stock Rom Firmware On Massgo One

These are the instructions to download Flash or install Stock Firmware (ROM) on Massgo One (Original firmware) , If you searching for the Massgo One Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Massgo One , Here you can download the Official Massgo One Stock Firmware ROM (flash file) on your Computer.

Download Massgo One Stock Rom (Original firmware)

Requirements: Your Massgo One Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Massgo_One_MT6580_20160302_5.1-[flash-file.net].zip
Flash File Size: 1 GB

Download Flash File

How to Flash Stock Firmware ROM on Massgo One

To install the Stock Firmware on Massgo One , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Massgo One .

STEP 1: Download and Install the Massgo One USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Massgo One device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Massgo One to your system using the USB cable and , press any button other than power button so that your system will detect your Massgo One Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Massgo One and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Massgo One using SP Flash Tool.

Keep in mind:

[*] Massgo One Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Massgo One Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Caution]: 8888888874445566688 Preloader.bin 8888845214444558662ش.

[*] Broken link Report here.

[*] ROOT Massgo One:If you would like to know how to root your Massgo One android device, drop a comment below. We will share the tutorial for your device as quickly as possible .