How To Flash Stock Rom Firmware On Maxcell M225

These are the instructions to download Flash or install Stock Firmware (ROM) on Maxcell M225 (Original firmware) , If you searching for the Maxcell M225 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Maxcell M225 , Here you can download the Official Maxcell M225Stock Firmware ROM (flash file) on your Computer .

DownloadMaxcell M225 Stock Rom (Original firmware)

Requirements: Your Maxcell M225 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Maxcell_M225_SW_20140904_SPD-[flash-file.net].zip
Flash File Size: 4 MB

Download Flash File

How to Flash Stock Firmware ROM on Maxcell M225

To install the Stock Firmware on Maxcell M225 Stock , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Maxcell M225 .

Step 1: Download and Install Maxcell M225 USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.

Step 2: After Download Stock Rom (pac) for your Maxcell M225 Device.

Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Maxcell M225 Device to the computer (make sure your Android Device is switch off).

Step 6: Once your Maxcell M225 is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac). Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.

Step 8: During the flashing process your Maxcell M225 Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.

Step 9: Now you have successfully flashed your Maxcell M225 using Spreadtrum Upgrade Tool. Once your Maxcell M225 Device is successfully restarted, Go to Settings About Phone Check firmware..

Congratulations, Now you have successfully flashed the stock firmware on your Maxcell M225 using Spreadtrum Upgrade Tool

Keep in mind:

[*] Maxcell M225 Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool for WINDOWS .

[*] Backup Please: Take a backup of your important data before Flashing Maxcell M225 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Maxcell M225:If you would like to know how to root your Maxcell M225 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .