Flash Guide How to Flash a ROM to Your Android Phone
These are the instructions to download Flash or install Stock Firmware (ROM) on Maxwest Nitro 5.5s (Original firmware) , If you searching for the Maxwest Nitro 5.5s Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Maxwest Nitro 5.5s , Here you can download the Official Maxwest Nitro 5.5s Stock Firmware ROM (flash file) on your Computer
Download Maxwest Nitro 5.5s Stock Rom (Original firmware)
Requirements: Your Maxwest Nitro 5.5s Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Maxwest_Nitro_5.5s_MT6572_20151207_4.4.2-[flash-file.net].zip
Flash File Size: 210 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
How to Flash Stock Firmware ROM on Maxwest Nitro 5.5s
To install the Stock Firmware on Maxwest Nitro 5.5s , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Maxwest Nitro 5.5s .
STEP 1: Download and Install the Maxwest Nitro 5.5s USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Maxwest Nitro 5.5s device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.
STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. 
STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. 
STEP 9: After completed all the above steps, connect your Maxwest Nitro 5.5s to your system using the USB cable and , press any button other than power button so that your system will detect your Maxwest Nitro 5.5s Device. You can use volume buttons. 
Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Maxwest Nitro 5.5s and switch it ON.
Congratulations, Now you have successfully flashed the stock firmware on your Maxwest Nitro 5.5s using SP Flash Tool.
Keep in mind:
[*] Maxwest Nitro 5.5s Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing Maxwest Nitro 5.5s Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Maxwest Nitro 5.5s:If you would like to know how to root your Maxwest Nitro 5.5s android device, drop a comment below. We will share the tutorial for your device as quickly as possible .
