These are the instructions to download Flash or install Stock Firmware (ROM) on Mediacom X500U (Original firmware) , If you searching for the Mediacom X500U Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Mediacom X500U , Here you can download the Official Mediacom X500U Stock Firmware ROM (flash file) on your Computer.
Download Mediacom X500U Stock Rom (Original firmware)
Requirements: Your Mediacom X500U Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Mediacom_X500U_MT6582_V1.20_13062014_4.2.2-[flash-file.net].zip
Flash File Size: 584 MB
How to Flash Stock Firmware ROM on Mediacom X500U
To install the Stock Firmware on Mediacom X500U , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Mediacom X500U .
STEP 1: Download and Install the Mediacom X500U USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Mediacom X500U device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Mediacom X500U to your system using the USB cable and , press any button other than power button so that your system will detect your Mediacom X500U Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Mediacom X500U and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Mediacom X500U using SP Flash Tool.
Keep in mind:
[*] Mediacom X500U Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing Mediacom X500U Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Caution]: 8888888874445566688 Preloader.bin 8888845214444558662ش.
[*] Broken link Report here.
[*] ROOT Mediacom X500U:If you would like to know how to root your Mediacom X500U android device, drop a comment below. We will share the tutorial for your device as quickly as possible .