Flash Guide How to Flash a ROM to Your Android Phone
These are the instructions to download Flash or install Stock Firmware (ROM) on Mexxen Data Terminal (Original firmware) , If you searching for the Mexxen Data Terminal Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Mexxen Data Terminal , Here you can download the Official Mexxen Data Terminal Stock Firmware ROM (flash file) on your Computer.
DownloadMexxen Data Terminal Stock Rom (Original firmware)
Requirements: Your Mexxen Data Terminal Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Mexxen_Data_Terminal_MT6735_5.1-[flash-file.net].zip
Flash File Size: 434 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
How to Flash Stock Firmware ROM on Mexxen Data Terminal
To install the Stock Firmware on Mexxen Data Terminal , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Mexxen Data Terminal .
STEP 1: Download and Install the Mexxen Data Terminal USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Mexxen Data Terminal device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.
STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. 
STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. 
STEP 9: After completed all the above steps, connect your Mexxen Data Terminal to your system using the USB cable and , press any button other than power button so that your system will detect your Mexxen Data Terminal Device. You can use volume buttons. 
Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Mexxen Data Terminal and switch it ON.
Congratulations, Now you have successfully flashed the stock firmware on your Mexxen Data Terminal using SP Flash Tool.
Keep in mind:
[*] Mexxen Data Terminal Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing Mexxen Data Terminal Stock Firmware as because during the flashing process your personal data will be removed permanently .
[*] Broken link Report here.
[*] ROOT Mexxen Data Terminal:If you would like to know how to root your Mexxen Data Terminal android device, drop a comment below. We will share the tutorial for your device as quickly as possible .
