Flash Guide How to Flash a ROM to Your Android Phone
These are the instructions to download Flash or install Stock Firmware (ROM) on Microkey E12 Titanium (Original firmware) , If you searching for the Microkey E12 Titanium Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Microkey E12 Titanium , Here you can download the Official Microkey E12 Titanium Stock Firmware ROM (flash file) on your Computer.
Download Microkey E12 Titanium Stock Rom (Original firmware)
Requirements: Your Microkey E12 Titanium Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Microkey_E12_Titanium_V06_20160512_SPD-[flash-file.net].zip
Flash File Size: 154 MB
How to Flash Stock Firmware ROM on Microkey E12 Titanium
To install the Stock Firmware on Microkey E12 Titanium , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Microkey E12 Titanium .
Step 1: Download and Install Microkey E12 Titanium USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.
Step 2: After Download Stock Rom (pac) for your Microkey E12 Titanium Device.
Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files:
Step 4: Now, open UpgradeDownload.exe.
Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Microkey E12 Titanium Device to the computer (make sure your Android Device is switch off).
Step 6: Once your Microkey E12 Titanium is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac).
Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.
Step 8: During the flashing process your Microkey E12 Titanium Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool. 
Step 9: Now you have successfully flashed your Microkey E12 Titanium using Spreadtrum Upgrade Tool. Once your Microkey E12 Titanium Device is successfully restarted, Go to Settings About Phone Check firmware..
Congratulations, Now you have successfully flashed the stock firmware on your Microkey E12 Titanium using Spreadtrum Upgrade Tool
Keep in mind:
[*] Microkey E12 Titanium Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool for WINDOWS .
[*] Backup Please: Take a backup of your important data before Flashing Microkey E12 Titanium Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Microkey E12 Titanium:If you would like to know how to root your Microkey E12 Titanium android device, drop a comment below. We will share the tutorial for your device as quickly as possible .
