These are the instructions to download Flash or install Stock Firmware (ROM) on Micromax Q331 (Original firmware) , If you searching for the Micromax Q331 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Micromax Q331 , Here you can download the Official Micromax Q331 Stock Firmware ROM (flash file) on your Computer
Download Micromax Q331 Stock Rom (Original firmware)
Requirements: Your Micromax Q331 Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Micromax_Q331_SW_V2.0.4_HW_V1.2.0_07312015_SPD-[flash-file.net].zip
Flash File Size: 553 MB
Flash Tool Link: SPD Flash Tool
How to Flash Stock Firmware ROM on Micromax Q331
To install the Stock Firmware on Micromax Q331 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Micromax Q331 .
Step 1: Download and Install Micromax Q331 USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.
Step 2: After Download Stock Rom (pac) for your Micromax Q331 Device.
Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Micromax Q331 Device to the computer (make sure your Android Device is switch off).
Step 6: Once your Micromax Q331 is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac). Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.
Step 8: During the flashing process your Micromax Q331 Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
Step 9: Now you have successfully flashed your Micromax Q331 using Spreadtrum Upgrade Tool. Once your Micromax Q331 Device is successfully restarted, Go to Settings About Phone Check firmware..
Congratulations, Now you have successfully flashed the stock firmware on your Micromax Q331 using Spreadtrum Upgrade Tool
Keep in mind:
[*] Micromax Q331 Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool .
[*] Backup Please: Take a backup of your important data before Flashing Micromax Q331 Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Micromax Q331:If you would like to know how to root your Micromax Q331 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .